Milling Cutters

End mills with taper shank

Taper shank end miils supplied by Pro Export Plus are made from efficient HSSE steel or for higher performace made by powder metallurgy. They are produced in accordance with DIN 845 and 845B/ ISO 1641 and usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium, Download file

Die sinking cutters

Die sinking cutters supplied by Pro Export Plus are made from efficient HSSE steel or for higher performace made by Powder Metalurgie. They are produced in accordance with DIN 1889/ISO 3940 and usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium, Download file

Side and face cutters

Side and face supplied by Pro Export Plus are made from efficient HSSE steel or cast HSS. They are produced in accordance with DIN 885 a DIN 1834/ ISO 2787 and are usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium Download file

Involute gear cutters

Module gear cutters supplied by Pro Export Plus are produced from HSS as standard, HSSE only upon request. Range is from module M 0,5 to M 10, 8 pieces in set. We supply also only individual numbers. Standard pressure angle is 20°, different pressure angle may be produced upon request.

Roller chain sprocket wheel cutters

Roller chain sprocket wheel cutters supplied by Pro Export Plus are produced from high speed steel, supplied in sets of three cutters from which No. 1 is suitable for milling sprocket wheels with 11 to 16 teeth, No. 2 cutter for sprocket wheels with 17 to 14 teeth and No. 3 cutter for sprocket wheels with 41 and more teeth.

Shell end mills

Shell end mills supplied by Pro Export Plus are made from efficient HSSE steel . They are produced in accordance with DIN 1880 and DIN 841/ ISO 2780/2586 and are usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium Download file

Gear hobs

Hobbing cutters for spur gears with involute profile, a=20° supplied by Pro Export Plus are used for hobbing of involute teeth. Cutters are made at combinations IIaA, IIbA or IIIb. They are constructed with right or left screw line rack cutters. Milling cutters are to be ordered with coated type TiN. These cutters are produced against order only, range is M 0,5 to M20, material HSSE.

Slot drills

Slot drills supplied by Pro Export Plus are made from efficient HSSE steel or for higher performace made by Powder Metalurgie. They are produced in accordance with DIN 327 and DIN 326/ ISO 1641 and usable for materials as specified below: < 600 MPa General construction steels, < 850 MPa steel castings, < 1100 MPa Tool steels low alloyed, < 900 MPa heat treatable steels, < 1100 MPa tool steels high alloyed, > 1100 MPa tool and treated steels, <240 HB cast iron <850 MPa corrosion+acid proof steels, <850 MPa chrome-nickel alloys, <500 MPa aluminium, aluminium cast, <1200 MPa titanium, titanium alloys. Download file

Sets of cutters

Pro Export Plus offers sets of vaslve seat cutters which are used for repairs of engine heads for passanger cars and trucks, suitable also for Diesel engines. Large set - 30° or 45°. Diameter of cutters from 30 to 60 mm in 2,5 mm steps, diameter of guides from 6 to 12 mm in 0,5 mm steps. Small set I - 30° or 45°. Diameter of cutters from 30 to 45 mm in 2,5 mm steps, diameter of guides from 6 to 9 mm in 0,5 mm steps. Small set II - 30° or 45°. Diameter of cutters from 45 to 60 mm in 2,5 mm steps, diameter of guides from 9 to 12 mm in 0,5 mm steps. We supply also valve seat cutters for water valves which are used for smoothening and cleaning of contact surface for water valve sealings which result in better function and much longer lelifetime.

Rotary burs

Technical cutters are used for hand processing of light alloys of non-ferrous metals, different types of plastics, woods and non-tempered steel. The cutter's drive is made by flexible shaft from motor. Technical cutters can be also used in electrical or pneumatic drills, grinders and similar machines. To achieve the best results during processing, the technical cutters are supplied with 5 types of teeth: 1. very coarse – for processing of fragile alloys, light metals, woods, fibres, rubber (soft, hard), tin, lead 2. coarse – for processing of resilient alloys, light metals, aluminium, copper, brass and bronze 3. fine – for general processing of malleable iron and steel 4. special – for processing of cast iron or tempered cast iron 5. very fine – for processing of all steel types thoroughly When high performance is required, it is recommended to use cutters with bigger teeth at high revolutions. Cutters of small teeth are used for fine and final works at low revolutions. The cutters are made of high-speed steel.

Form cutters

Form cutters supplied by Pro Export Plus are made from efficient HSSE steel or for higher performace made by Powder Metalurgie. They are produced in accordance with DIN 851 a DIN 1833 A-D/ ISO 3337 a 3859 and usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium, Download file

End Mills

End Mills supplied by Pro Export Plus are made from efficient HSSE steel or for higher performace made by Powder Metalurgie. They are produced in accordance with DIN844/ISO 1641 and usable for materials as specified below: < 600 MPa General construction steels < 850 MPa steel castings < 1100 MPa Tool steels low alloyed < 900 MPa Heat treatable steels < 1100 MPa Tool steels high alloyed > 1100 MPa Tool and treated steels <240 HB Cast iron <850 MPa Corrosion+acid proof steels <850 MPa Chrome-nickel alloys <500 MPa Aluminium, Aluminium cast <1200 MPa Titanium,